SMC – Magnet Gripper MHM-X6400
- Sản Phẩm
SMC – Magnet Gripper MHM-X6400
・Steel plates can be transferred without a vacuum.
Supports workpieces with holes and uneven surfaces where a vacuum pad cannot be used.
・Holds workpieces even when air is shut off.
・High holding force: 80 N (Workpiece plate thickness: 0.6 mm), 120 N (Workpiece plate thickness: 1.4 mm)
・Residual holding force 0.3 N or less (Reduces workpiece release time)
Supports workpieces with holes and uneven surfaces where a vacuum pad cannot be used.
・Holds workpieces even when air is shut off.
・High holding force: 80 N (Workpiece plate thickness: 0.6 mm), 120 N (Workpiece plate thickness: 1.4 mm)
・Residual holding force 0.3 N or less (Reduces workpiece release time)
-
Liên hệ
 |
・Steel plates can be transferred without a vacuum. |
|
|
Data DownloadPDF(1.3MB)
| Other Data |
|---|
| Series | Holding force (Workpiece plate thickness: 0.6 mm) |
|---|---|
| MHM-32D1-X6400 | 80N |
| MHM-32D2-X6400 | 50N |
| MHM-32D3-X6400 | 30N |
■Steel plates can be transferred without a vacuum.
Supports workpieces with holes and uneven surfaces where a vacuum pad cannot be used.
■Holds workpieces even when air is shut off.
■High holding force: 80 N (Workpiece plate thickness: 0.6 mm), 120 N (Workpiece plate thickness: 1.4 mm)
■Residual holding force 0.3 N or less (Reduces workpiece release time)
■Holding force can be adjusted with a bumper with 3 types of thicknesses.
Prevents deformation of workpieces and accidental adsorption of a second piece.
Fluororubber with excellent oil resistance is used.
Has a contact surface structure which reduces sideslip.
Bumper can be replaced without a tool.
■Auto switches can be mounted on 4 surfaces.
■Mountable on 3 surfaces.
Sản phẩm cùng loại
