OMRON CJ1W AD041-V1
- Sản Phẩm
OMRON CJ1W AD041-V1
-
Liên hệ
| Item | CJ1W-AD041-V1 | CJ1W-AD081-V1 | CJ1W-AD042 | |||
|---|---|---|---|---|---|---|
| Unit type | CJ-series Special I/O Unit | |||||
| Isolation *1 | Between I/O and Controller signals: Photocoupler (No isolation between I/O signals.) |
Between I/O and Controller signals: Digital isolator (No isolation between I/O signals.) |
||||
| External terminals | 18-point detachable terminal block (M3 screws) | |||||
| Power consumption | 420 mA max. at 5 VDC | 520 mA max. at 5 VDC | ||||
| Dimensions (mm) | 31 × 90 × 65 mm (W × H × D) | |||||
| Weight | 140 g max. | 150 g max. | ||||
| General specifications | Conforms to general specifications for CJ Series. | |||||
| Input specifi- cations |
Number of analog inputs | 4 | 8 | 4 | ||
| Input signal range *2 | 1 to 5 V 0 to 5 V 0 to 10 V – 10 to 10 V 4 to 20 mA *3 |
1 to 5 V 0 to 10 V – 5 to 5 V – 10 to 10 V 4 to 20 mA *4 |
||||
| Maximum rated input (for 1 point) *5 |
Voltage Input: ± 15 V Current Input: ± 30 mA |
|||||
| Input impedance | Voltage Input: 1 MΩ min. Current Input: 250 Ω (rated value) | |||||
| Resolution | 4,000/8,000 *6 | 1 to 5 V | 10,000 | |||
| 0 to 10 V | 20,000 | |||||
| – 5 to 5 V | 20,000 | |||||
| – 10 to 10 V | 40,000 | |||||
| 4 to 20 mA | 10,000 | |||||
| Converted output data | 16-bit binary data | |||||
| Accuracy *7 |
25 °C *8 | Voltage Input: ± 0.2% of F.S. Current Input: ± 0.4% of F.S. | ||||
| 0 °C to 55 °C | Voltage Input: ± 0.4% of F.S. Current Input: ± 0.6% of F.S. | |||||
| A/D conversion period *9 | 1 ms/250 μs per point *6 | 20 μs/1 point, 25 μs/2 points, 30 μs/3 points, 35 μs/4 points |
||||
| Input functions |
Mean value processing | Stores the last “n” data conversions in the buffer, and stores the mean value of the conversion values. Buffer number: n = 2, 4, 8, 16, 32, 64 |
Stores the last “n” data conversions in the buffer, and stores the mean value of the conversion values. Buffer number: n = 2, 4, 8, 16, 32, 64, 128, 256, 512 |
|||
| Peak value holding | Stores the maximum conversion value while the Peak Value Hold Bit is ON. | |||||
| Scaling | — | Setting values in any specified unit within a range of ±32,000 as the upper and lower limits allows A/D conversion to be executed and analog signals to be output with these values as full scale. |
||||
| Input disconnection detection |
Detects the disconnection and turns ON the Disconnection Detection Flag. *10 | |||||
| Offset/gain adjustment | Supported | — | ||||
| Direct conversion | — | A/D conversion is performed and the converted value is refreshed when the ANALOG INPUT DIRECT CONVERSION instruction (AIDC) is executed. This instruction is supported by the CJ2H-CPU[][](-EIP) CPU Units with unit version 1.1 or later, and CJ2M-CPU[][]. CJ1, NJ501, and CP1H CPU Units and NSJ Controllers do not support direct conversion. |
||||
XEM CATALOG SẢN PHẨM TẠI ĐÂY
Sản phẩm cùng loại
